Network Switch - 16 PORT 10/100 STACKABLE
< Prev | Next >
Switches are designed for departments or offices
needing "Big Pipe" bandwidth with minimum hassles.
A switch divides each port’s traffic onto its own
individual segment. This cuts a network’s traffic
load and reduces collisions on each segment.
Network traffic can be further reduced by placing
users (ex. Departments) and devices that normally
talk to each other onto the same segment.
Our switches also provide a Crossover function
for Uplinking to a standard port on another Hub.
Every port can operate in Auto-Negotiation mode,
or can be set to a forced 100Mbps Full-Duplex mode.
In every mode, our switches provides wire-speed
“Forwarding and Filtering” rates that eliminate
bad packets with minimal delay.
PRODUCTS SHOWN MAY VARY, PRICES SUBJECT
TO CHANGE WITHOUT NOTICE. CERTAIN TERMS, CONDITIONS, AND RESTRICTIONS MAY APPLY.